Smart switches, schedules and app control installed by our licensed electricians, so hot water, heaters and appliances run when your solar is producing.
From $690 (Starter set, installed), including GST. Indicative starting price: the final fixed price is confirmed in writing after a site assessment.
Most homes with solar export a large share of their daytime generation for a few cents per kWh, then buy power back in the evening at a much higher price. Smart home energy controls help close that gap. We install smart switches and controllers on selected circuits and appliances, so electric hot water, pool pumps, heaters and other flexible loads run on a schedule or while your solar is producing, and you can check and adjust them from an app.
A starter set is from $690 installed. This is an indicative starting price: the final price depends on how many circuits you want controlled, the condition of your switchboard and the type of device that suits each load.
We look at your home as one energy system rather than a list of gadgets. Because we design and install solar and batteries, we can set schedules around your actual generation, your tariff and any battery, and tell you plainly which loads are worth controlling and which are not. All fixed wiring is done by our licensed electricians, and we choose devices rated for the load they switch, so a heater or hot water system is never left running through an undersized plug-in timer.
Homeowners with solar who want hot water, heaters and other large loads to run on their own daytime generation instead of evening grid power.
Smart controls do not create energy; they change when you use it. The benefit depends on how much solar you export, your tariff and how flexible your loads are. Electric storage hot water is often the single biggest load that can be moved to the middle of the day.
1. Request a quote and tell us which appliances and circuits you want to control.
2. We review your loads, tariff, solar size and switchboard, then send a written quote.
3. Our licensed electricians install and test the controls, usually in one visit.
4. We set up the schedules and the app with you and show you how to override them.
5. You receive your compliance certificate, and we can fine-tune schedules after a few weeks of use.
The price shown is an indicative starting price; the final fixed price is confirmed in writing after a site assessment or quote.
All fixed electrical work is carried out by our licensed electricians and certified as required in NSW.
Switchboards with old fuses or no safety switches may need an upgrade first, which is quoted separately.
Changes to a network-controlled off-peak circuit may require a meter or tariff change arranged through your electricity retailer.
Smart devices need a working Wi-Fi connection at the install location for app control.
Where we work
Timing
How your request works
Prices include GST.
